 |
About Us |
|
|
|
Products |
|
|
|
HEPA Deep & Mini Pleat Filters |
|
|
|
Varicell Filters |
|
|
|
Multi Wedge HEPA Filters |
|
|
|
Bag, Panel & Pre-Filters |
|
|
|
Packing Specification |
|
|
|
Optional Extras |
|
|
|
News |
|
|
|
Contact Us |
|
|
| ||
| Multi Wedge HEPA Filter Technical Specification FILTER CASING: Galvanised steel or aluminium with vertical support bars. MEDIA: Water repellent, flame retardant, anti-fungicide treated micro-glass medium. 21mm uniform pleat height, each pleat separated by a thermo-setting hot-melt. Number of pleats: 290-295 per metre. SEALANT: Sealed to the casing on all four sides by a two part semi rigid polyurethane elastomer. GASKET SEAL: Research, industrial and energy: fitted with a single piece EPDM self-adhesive gasket seal to the outlet (clean) face of the filter. The gasket will be mitred and sealed at each corner and finished with a sealed scarf join. TESTING: The F6, 7 and 8, H10, 11 and 12 filters are visibly inspected to search for any imperfections or manufacturing damage. All H12 and above are scan tested with Hot Ondina (DOP equivalent). TOLERANCES: Manufacturing tolerances for this product range are +0/-2mm and diagonals are equal to within 2mm. PACKING: A separate packing specification sheet covers the packing requirements for all product ranges supplied by Remploy Filters. LABELLING: All filters are supplied with named labels attached; these can be Remploy Limited labels or bespoke to suit. SIZES: This specification sheet covers all filter sizes. Standard and non-standard sizes available. * Test certificated provided upon request |
|
  |
|
||